To edit an existing click rotator link, follow these steps.
Click on “Click Rotators” in the navigation menu This will bring you to click rotator management area.
Scroll down the page to the section labeled “Active Click Rotators.”
You can use the search box to locate a specific click rotator or group of click rotators. You can also sort on each column by clicking on the header cell of the column. You can reverse the order by clicking on the header cell a second time.
Once you have located the desired click rotator, click on the link in the column named “URLs” for that click rotator. This will bring you to the manage links area for the click rotator.
Now scroll down the page to the “Active Rotator Links” section. You will see the active and paused links in the rotator listed in table format.
Once you have located the click rotator link that you would like to edit, click on the click rotator links description link. This will bring you to the edit click rotator link page.
Please note that not all fields are required. Just edit or fill in the fields that you need, for the click rotator link to perform in the manner you desire.
Here is a list of the available fields and their uses when editing an existing click rotator link.
Click Rotator Link Basic Information
Link Description:
Enter a description for this link. The description is used to help you identify this particular link in lists that contain multiple click rotator links. This description is also displayed on the client stats page.
Destination URL:
Enter the destination URL for this rotator link. This is the URL all traffic will be sent to when the rotator selects to send a click to this click rotator link. Make sure you enter the full URL including the leading http:// or https://.
Test Destination URL (optional):
Checking this box will test the URL to see if it is valid and reachable when you save the new click rotator link. You can override this test by leaving the checkbox un-checked.
Total Unique Clicks To Send:
Enter the number of unique clicks you want to send to this link. After this number of clicks has been sent, no further clicks will be sent to this link. If you leave this field blank or enter 0, NO clicks will be sent to this link.
Notes (optional):
You can enter any notes you want to keep on this link in this field.
Click on the “Advanced Settings” button below the basic click rotator link fields to display the available advanced click rotator link settings.
Click Rotator Link Advanced Settings
Daily Click Limit (optional):
If you want to limit the number of clicks that are sent to this link each day, enter that number here. Once this number of clicks has been sent, the link will be skipped until the next day when the daily click counter resets to zero. Leave this number set to 0 if you do not want to limit the daily clicks.
Link Status:
This field lets you set the status of this link. You can set it to active, paused or archived. While a link is set to paused or archived, no clicks are sent to it. An archived link is also moved out of the active links list and to an archived links list. Only links set to active will receive clicks.
Series Position (optional):
If you would like to add this link in a particular series position in the rotator, enter the number of the position in this field. When this link is saved, all links above and below this position will be adjusted. Leave this field set to 0 to add the link to the end.
Click Rotator Link Advanced GEO Targeting Settings
Limit to Countries (optional):
If you would like to send only traffic from specific countries to the destination URL of this click rotator link, enter the country codes separated by a comma in this field. Do not enter any spaces. For example, if you want to send traffic to the US, Canada and Australia only you would enter the following in this field.
US,CA,AU
For a list of supported country codes, see the resources section of this manual.
If you are using enhanced selection boxes, simply select the countries from the dropdown list. To remove a country, click on the x by the country name.
Block These Countries (optional):
If you would like to block traffic from specific countries to the destination URL of this click rotator link, enter the country codes separated by a comma in this field. Do not enter any spaces. For example, if you want to block traffic to the US, Canada and Australia you would enter the following in this field.
US,CA,AU
For a list of supported country codes, see the resources section of this manual.
If you are using enhanced selection boxes, simply select the countries from the dropdown list. To remove a country, click on the x by the country name.
Click Rotator Link Traffic Type Advanced Settings
Minimum T1 Clicks Percentage (optional):
If you would like to send a minimum percentage of T1 clicks to this click rotator link, enter the percentage in this field. For example, enter 70 to send a minimum of 70% of the total clicks to be sent to this link as T1 clicks. Do not enter the percentage sign. If this field is set to 0, it will be ignored.
Maximum T1 Clicks Percentage (optional):
If you would like to send a maximum percentage of T1 clicks to this click rotator link, enter the percentage in this field. For example, enter 90 to send a maximum of 90% of the total clicks to be sent to this link as T1 clicks. Do not enter the percentage sign. If this field is set to 0, it will be ignored.
Minimum Mobile Clicks Percentage (optional):
If you would like to send a minimum percentage of mobile clicks to this click rotator link, enter the percentage in this field. For example, enter 70 to send a minimum of 70% of the total clicks to be sent to this link as mobile clicks. Do not enter the percentage sign. If this field is set to 0, it will be ignored.
Maximum Mobile Clicks Percentage (optional):
If you would like to send a maximum percentage of mobile clicks to this click rotator link, enter the percentage in this field. For example, enter 90 to send a maximum of 90% of the total clicks to be sent to this link as mobile clicks. Do not enter the percentage sign. If this field is set to 0, it will be ignored.
Click Rotator Link Other Advanced Settings
Start Date (YYYY-MM-DD) (optional):
If you would like to schedule a start date in the future to send clicks to this link, set the start date in this field. You can set the time in the next field. No clicks will be sent to this link until after the date entered here and the time in the next field.
Start Time (HH:MM AM/PM) (optional):
This field works with the above start date. Set the time of the start date in this field.
End Date (YYYY-MM-DD) (optional):
If you would like to schedule an end date in the future to stop sending clicks to this link, set the end date in this field. You can set the time in the next field. No clicks will be sent to this link after the date entered here and the time in the next field.
End Time (HH:MM AM/PM) (optional):
This field works with the above end date. Set the time of the end date in this field.
Client Stats Password (optional):
If you plan on providing partners and clients access to view only stats, enter the desired password in this field. Leaving it blank will disable read only stats for this click rotator link.
Treat Tablets as (optional):
You can set how tablets are treated with this setting. If you want them to be treated as computers, select computer. If you want them treated as mobile devices, select mobile.
To save your changes and update the click rotator link, click on the “Update” button.